Eugene Maker Space Forums
Various Discussions...

Home » Public Forums » Discuss » Re: 3D printing questions
Re: 3D printing questions [message #14902] Mon, 11 February 2019 13:21 Go to next message
Clif is currently offline  Clif
Messages: 917
Registered: March 2012
Senior Member
Hi Folks,

I have a friend who has a friend, who would like some 3D models printed.
I can put you in touch if you'd like to give it a go. I suppose they
would be happy to pay something for your time.

    Ciao,
    Clif

On 2/11/19 1:14 PM, Monk-ei wrote:
> Dear Mr.CLiF
>
> LongTimeNoSpeaK :)! How's life? KeepinG busy?
>
> I've got a friend who is wrking on a project that needs a couple of
> small models of Basler and Twin Otter planes. Do u know anyone who'd
> be into printing up a couple or 3 of each? I don't know exactly what
> scale to tell u they need to be. But, if the wingspan on the Twin
> Otter's could be close to an inch and the Basler's an appropriate
> ratio larger....
>
> Anyways! if u know of someone who'd be interested.... :)
>
> MonK
_______________________________________________
Discuss mailing list
...

Re: 3D printing questions [message #14903 is a reply to message #14902] Tue, 12 February 2019 10:57 Go to previous messageGo to next message
normgr00 is currently offline  normgr00
Messages: 160
Registered: December 2012
Location: United States
Senior Member
I have used 3D hubs to print things. It's like a Uber of 3D printing. You load your files and specify what material you want it printed in and back comes a bunch of people with printers that will print it and for how much. Some printers are high school kids some are big industrial fab places. The ones I used were people in my neighborhood up here in Portland. 
Greg Norman
Online 3D printing service | FDM, SLA, SLS & DMLS | 3D Hubs


|
|
| |
Online 3D printing service | FDM, SLA, SLS & DMLS | 3D Hubs

Upload your CAD files, get an instant 3D printing quote and go into production in less than 5 minutes
|

|

|




On Monday, February 11, 2019, 1:21:58 PM PST, Mr. Clif wrote:

Hi Folks,

I have a friend who has a friend, who would like some 3D models printed.
I can put you in touch if you'd like to give it a go. I suppose they
would be happy to pay something for your time.

    Ciao,
    Clif

On 2/11/19 1:14 PM, Monk-ei wrote:
> Dear Mr.CLiF
>
> LongTimeNoSpeaK :)!
...

Re: 3D printing questions [message #14904 is a reply to message #14903] Tue, 12 February 2019 17:00 Go to previous message
Clif is currently offline  Clif
Messages: 917
Registered: March 2012
Senior Member
Good Suggestion, thanks Greg!

    Clif

On 2/12/19 10:57 AM, Greg Norman wrote:
> I have used 3D hubs to print things.
> It's like a Uber of 3D printing. You load your files and specify what
> material you want it printed in and back comes a bunch of people with
> printers that will print it and for how much. Some printers are high
> school kids some are big industrial fab places. The ones I used were
> people in my neighborhood up here in Portland.
>
> Greg Norman
>
> Online 3D printing service | FDM, SLA, SLS & DMLS | 3D Hubs
>
>
>
>
>
>
> Online 3D printing service | FDM, SLA, SLS & DMLS | 3D Hubs
>
> Upload your CAD files, get an instant 3D printing quote and go into
> production in less than 5 minutes
>
>
>
>
>
> On Monday, February 11, 2019, 1:21:58 PM PST, Mr. Clif
> wrote:
>
>
> Hi Folks,
>
> I have a friend who has a friend, who would like some 3
...

Previous Topic: Large kiln and financing
Next Topic: Music Gear for Sale
Goto Forum:
  


Current Time: Wed Feb 20 16:37:31 PST 2019

Total time taken to generate the page: 0.03534 seconds